MadBoy TONER 3, Owner'S Manual, Page: 7 / 72

1. LINE IN: For connecting the analog audio source. You can connect the audio source
using RCA-RCA cable in case your device have RCA output. In case your device have
headphone output (tablet, phone, smart-tv), you can use 1/8" TRS plug - RCA cable.
2. OPTICAL INPUT 1/2: For connecting digital audio sources (TV, DVD player, etc) using
optical Toslink cable. The audio source must be set to output audio in 2-channel PCM
format. Supports sampling rates between 32-96 kHz.
3. OPTICAL OUTPUT: For connecting the device digitally to the amplifier or mixing
amplifier equipped with optical Toslink input. Toner 3 supports 2-channel PCM format
with 48 kHz sampling rate.
4. USB: Connect to the power adapter using USB A - USB B cable or connect to the
computer to connect audio using USB Audio Interface. Toner 3 gets its power from your
computer via the USB connection so there is no need for a separate power supply.
Toner 3 supports 2-channel PCM audio format with 48 kHz sampling rate via USB
interface. USB Audio Interface can be used as input and output simultaneously.
5. LINE OUT: Balanced 1/4" TRS outputs for connecting audio to the mixer or mixing
amplifier. You can use 1/4" TS plug - RCA cable to connect the audio to the unbalanced
audio systems with RCA input.
6. POWER SWITCH: Set the main power switch to ”I” position before using the device.
Turn on the device by pressing the power button on the front panel or remote control.
WWW.MADBOY-AUDIO.COM
7
Back Panel
1 2 3 4 5 6
LINE OUT USB
L
R
LINE IN
L
R
MODEL: TONER 3
WWW.MADBOY-AUDIO.COM
SERIAL NO.:
DC 5 V / 0.5 A
DESIGNED IN FINLAND
I
0
OPTICAL
INPUT 1
OPTICAL
INPUT 2
OPTICAL
OUTPUT