background image

Power-Cord Protection:

Power supply cords should be routed so that they are not likely to be walked on or pinched 
by items placed upon or against them, paying particular attention to cords and plugs, 
convenience receptacles and the point where they exit from the appliance.

Cleaning:

Unplug this unit from the wall outlet before cleaning. Do not use liquid cleaners or
aerosol cleaners. Use a damp cloth for cleaning. 

Non-use Periods:

The power cord of the appliance should be unplugged from the outlet when left unused for a
 long period of time.

Object and Liquid Entry:

Care should be taken so that objects do not fall and liquids are not spilled into the enclosure
 through openings.

Damage Requiring Sercice:

The appliance should be serviced by qualified service personnel when:
-the power supply cord or the plug has been damaged;or
-objects have fallen, or liquid has been spilled into the appliance or
-the appliance has been exposed to rain; or
-the appliance does not appear to operate normally or exhibits a marked change in 

 performance;or

-the appliance has been dropped, or the enclosure damaged.

Servicing:

The user should not attempt to service the appliance beyond that which is described in the
Operating Instructions. All other servicing should be referred to qualified service personnel.

BLENDER-422  4/6 Mixer with DSP effects

4/6-channel mixing console with two stereo channels and a separate stereo tape
channel
Separate input JACK controls for mix and line inputs for all mono channels
XLR mic connectors on all mono channels
Low-noise, discrete mic preamplifiers on all microphone inputs
Dedicated inserts on all mono channels
Balanced 1/4" stereo jack and RCA-connectors for stereo channels
 Balance controls on all stereo channels
Separate stereo tape channel with 1/4" and RCA jacks
Stereo output for recording applications
3-band EQ on all channels
AUX and effects paths as well as separate gain controls on all channels
High-grade-sealed faders and potentiometers
Insert option for external effects devices
AUX Send and EFX Send controls in the main section for optimal level adjustment
Headphones output with dedicated volume control
Built-in +48V phantom power for condenser mics

2

WWW.MADBOY-AUDIO.COM

Summary of Contents for BLENDER-422









Reviews: