0-2020/AB page 2
Move over about 10 cm and insert a
second lever.
Pry it down and then slide it along the rim
to release the tire.
Hook also this second lever to a spoke.
Check again that the tire is in the rim
center.
Do this on the same side all around the
diameter of t he rim.
Engage one tire lever under
bead of tire. Pull the lever
towards spokes to lift bead off
rim, and hook it to a spoke.
If it appears too difficult it means
that the bead is no longer in the
middle of the rim.
With the other
hand push the bead of tire
toward rim center. In this way
the force acting on the lever will
be much lower and you will
succeed more easily.
THIS IS THE „KEY STEP“. Do not forget it !
