02-18-2016
TE2 Metal Button Panels
Different metal button panels will be made available so you can also have different button
layouts. To insert new metal button panel, please follow the below instructions.
1.
After opening the FightStick, using the flat head screwdriver tool, hold the bottom of the
joystick shaft, and twist off the joystick ball top.
2.
Remove the shaft and dust covers from the joystick.
3.
Using the hex head screwdriver tool, remove the eight hex screws from the inside of the
top casing to remove the bezel.
4.
Remove the bezel, clear top panel, and artwork.
5.
Remove the joystick harness from the joystick.
6.
Remove the button harness quick disconnects from the buttons.
7.
Using the hex head screwdriver tool, remove the six hex screws from the top of the
metal button panel.
8.
Insert new metal button panel.
9.
Insert joystick and buttons into new button panel.
10.
Reverse instructions to re-assemble.
