Build Pic
For my prototype build, I went all out and included modulation using an AQB_MOD board.
I used one of the 100kB dual concentric pots and knobs from smallbear. Since there was
no room for a switch to turn the modulation off, I opted to include a series resistor. This
is the wiring I used for the mod board. I did use a 1550B instead of 1590B enclosure,
though.
I don’t remember the exact value I used for the resistor. It might have been 220k or small
-
er. The idea is to pick the right value so when the Depth is turned all the way down the
modulation is essentially cut-off. To be clear: I do not recommend trying modulation with
the Aquababy unless you are really patient and experienced!
Summary of Contents for Aquababy
Page 2: ...Layout Traces ...
Page 6: ...Wiring ...
Page 7: ...1590B Drill Guide 3 pots ...
Page 11: ...Schematic ...
