Mad Bean Pedals Aquababy, Manual

Page: 4 / 11

Shopping List
Value QTY Type Rating
22R 1 Metal / Carbon Film 1/4W
470R 1 Metal / Carbon Film 1/8W
10k 21 Metal / Carbon Film 1/8W
18k 1 Metal / Carbon Film 1/8W
22k 2 Metal / Carbon Film 1/8W
47k 5 Metal / Carbon Film 1/8W
100k 4 Metal / Carbon Film 1/8W
470k 1 Metal / Carbon Film 1/8W
1M 1 Metal / Carbon Film 1/8W
100pF 5 Ceramic / MLCC 25v min
330pF 2 Ceramic / MLCC 25v min
1n 1 Film 25v min
2n2 1 Film 25v min
6n8 3 Film 25v min
33n 1 Film 25v min
39n 1 Film 25v min
47n 1 Film 25v min
82n 1 Film 25v min
100n 2 Film 25v min
220n 2 Film 25v min
1uF 1 Film 25v min
1uF 7 Electrolytic 25v min
10uF 4 Electrolytic 25v min
22uF 1 Electrolytic 25v min
100uF 1 Electrolytic 25v min
1N4001 1
1n914 1
MPSA18 4 or, other BJT
4558 1
NE570 1
MN3005 1
MN3101 1
20k 1 Bourns 3362p
10k 1 Bourns 3362p
1M 1 Bourns 3362p
1MB 1 Solder Lug 16mm
50kB 2 Solder Lug 16mm
• You can use either 20k or 25k for the trimmer if you cannot get a 22k.
• You can use either NOS MN3005 (if you have one) or the new Xvive reproduction MN3005. No, I do not know where
you can buy genuine NOS MN3005…sorry!
• You can use other BJT like 2n3904 or 2n5088 for the MPSA18. Just mind the pinouts if subbing transistors.
• Using a silver mica or MLCC type cap for C30 (100pF) will produce optimal results (due to tighter tolerance).