Macurco DVP-120C Manual
REV – 1.0
[34-8708-4770-8 ]
32
|
P a g e
The up cursor key scrolls through the menu entries in the order listed here, while the down cursor key scrolls in the
reverse order.
Changing the configuration parameters requires the entry of a password before changes can be made. The default
password is 1234. See
for an example of the password prompt.
In many cases, the parameter is entered as a string of digits, but some parameters are selected by pressing a single
key, e.g. pressing 1 selects Monday, 2 selects Tuesday, etc.
4.13.1
System Menu
The top menu level allows the user to select:
•
Configure System
•
Configure Sensors
•
Configure Relays, Horn & Strobe
•
Configure Zones
•
Configure Signals
The up and down cursor keys can be used to scroll through the entries in the list, while the left or right key will enter
the submenu.
The MENU key will return to normal mode. If any configuration parameters have been changed, the panel will
prompt to save the changes. If the changes are saved, this is the point at which they become effective in controlling
the ventilation system and for alarm level detection. Note that changes to the time and day of week are not
considered configuration items; they are saved as soon as they are entered.
4.13.2
Configure System Submenu
The system configuration submenu provides entries to:
•
Set the time of day, 24-hour format
•
Set the day of the week, day 1 is Monday
•
Load Default Configuration
•
Change Password
•
Configure Sensor Type
•
Configure Modbus
•
Configure Occupied Periods
4.13.2.1
Set Time of Day
T i m e : 2 2 : 5 5
D a y : T u e s d a y
Figure 4-24 Set Time of Day
This display example shows that the time is 22:55 (10:55 PM). The underlined characters indicate that the numeric
keys can be used to set the current time of day. When the first digit is entered (and after the password is entered if
required), the display will change to show that the “hour” portion of the time is currently being entered.
T i m e : 0 1 : 5 5
