Macurco DVP-1200, Manual

Page: 6 / 68

Macurco TM DVP-1200 Manual
REV – 1.3.1 [34-8708-4770-7 ] 5 | P a g e
1 General Safety Information
1.1 List of warnings
WARNING
Each person using this equipment must read and understand the information in this User manual
before use. Use of this equipment by untrained or unqualified persons or use that is not in accordance
with this user manual, may adversely affect product performance.
This equipment helps monitor for the presence and concentration level of certain specified airborne
gases. Misuse may produce an inaccurate reading, which means that higher levels of the gas being
monitored may be present and could result in overexposure. For proper use, see supervisor or User
manual, or call Macurco Technical Service at 1-844-325-3050.
DVP-1200 may not function effectively below 32°F (0°C) or above 104°F (40°C). Using the equipment
outside of this temperature range may adversely affect product.
Immediately exit any environment that causes an alarm condition on the sensor.
Each time the unit is turned on it performs a self-test, which activates the audible and visual alarms. If
the self-test fails, or all the alarms do not activate, do not use and contact Technical Support at 1-844-
325-3050.
Do not cover or obstruct audible alarm opening or visual alarm LED. Doing so may adversely affect
product performance.
Do not disassemble unit or attempt to repair or modify any component of this instrument. This
instrument contains no user serviceable parts, and substitution of components may adversely affect
product performance and void product warranty.
Use only for monitoring the gases which the sensors and equipment are designed to detect. Failure to
do so may result in exposures to gases not detectable and result in serious injury or death. For proper
use, see supervisor or User manual, or Contact Technical Support at 1-844-325-3050.
Failure to follow instructions outlined in this user manual can result in sickness or death.