Macurco CD-6G Operation Manual
REV – 1.0
[34-2900-0510-9 ]
18
|
P a g e
Figure 4-1 – Board View
4.5.1
Selecting Default Configuration – “dEF”
To select the Default Configuration, in normal mode, push the
Next
button to get to “Con” or the Configuration menu. Then
push the
Enter
button to enter the Con menu. The first selection is the “dEF” or Default setting. Push
Enter
. If it is already in
Default configuration, there will be no action. If it is not already in Default configuration, “nO” will be displayed. Push
Next
to
change it to “YES” (flashing) then push
Enter
to confirm the change (solid) and push
Enter
again to return to “dEF” in the con
menu. Push
Next
until “End” is displayed then push
Enter
to get back to normal operation.
4.5.2
Power-Up Test Setting – “PUt”
To select the Power Up Test Configuration, in normal mode, push the
Next
button to get to “Con” or the Configuration menu.
Then push the
Enter
button to enter the Con menu. Then push the
Next
button to get to the second selection “PUt” or Power
Up Test setting. Push
Enter
. If the test is “On” push
Next
to turn it “OFF” (flashing) then push
Enter
to confirm the change (solid)
and push
Enter
again to return to “PUt” in the Con menu. Push
Next
until “End” is displayed then push
Enter
to get back to
normal operation.
4.5.3
Display Setting – “dSP”
To select the Display Configuration, in normal mode, push the
Next
button to get to “Con” or the Configuration menu. Then
push the
Enter
button to enter the Con menu. Then push the
Next
button to get to the third selection “dSP” or Display setting.
Push
Enter
. If the display is “On” push
Next
to turn it “OFF” (flashing) then push
Enter
to confirm the change (solid) and push
Enter
again to return to “dSP” in the Con menu. Push
Next
until “End” is displayed then push
Enter
to get back to normal
operation.
4.5.4
Buzzer Setting – “bUZ”
To select the Buzzer Configuration, in normal mode, push the
Next
button to get to “Con” or the Configuration menu. Then push
the
Enter
button to enter the Con menu. The fourth selection is the “bUZ” or Buzzer setting. Push
Next
twice to get to “bUZ”
then
Enter
. If the display is “On” push
Next
to turn it “OFF” (flashing) then push
Enter
to confirm the change (solid) and push
Enter
again to return to “bUZ” in the Con menu. Push
Next
until “End” is displayed then push
Enter
to get back to normal
operation.
Summary of Contents for CD-6G
