13
TYPES OF SYSTEMS
STAND-ALONE DETECTORS
Dry contact relays or 4-20mA
outputs to control fans, louvers,
valves, horn and strobes, etc.
x2
x12
x3
4 conductor homerun
2 for power, 2 for signal
DETECTION AND VENTILATION
CONTROL PANEL (DVP-120)
• The 6 and 12 series gas detectors can be used as a stand-alone setup
• This family of detectors is offered in low voltage or line voltage and can
tie directly into many different pieces of equipment using one of the two
dry contact relays or the 4-20mA output
• Customizable settings are done from each detector
• The DVP-120 has the capacity to handle up to 12 of the 6 series detectors
via a 4-wire homerun from each detector
• The DVP-120 has three 10 amp form relays along with two 24VDC
outputs
• Any combination of gases within the 6-series will work with the DVP-120
