MACROZA M80, User Manual, Page: 8 / 24

8
figure. 5
figure. 4
“Correct”
“Left hand incorrect”
VERTICAL CHASES
• Vertical chases are done from top to bottom.
• Right hand should hold on to handle and switch while the left hand firmly grips on the
milling cutter cover (Figure 5).
• Left hand guides the chaser machine bearing most of the force.
• Once the cutter has entered the wall, pull down MACROZA wall chaser with both
hands producing a straight vertical cut.
• A difference in movement from one hand to the other will produce a curved cut.
• Plug MACROZA wall chaser in the mains socket.
• Switch on the machine before contact with the surface to verify its rotating direction.
Teeth must rotate forward as shown in Figure 4.
• Lean your MACROZA wall chaser lateral to the wall. Slowly insert the milling cutter
into the wall (Figure 4).
• Hold the machine firmly to avoid initial vibrations.
STARTING JOB