E - 18
PLAYING A DISC
This owner’s manual explains the basic instructions of this unit. Some DVD discs are produced in
a manner that allows specific or limited operation during playback. As such, the unit may not
respond to all operating commands. This is not a defect in the unit. Refer to the instruction notes
of discs.
“ ” may appear on the screen during operation. A “ ” means that the desired operation
is not permitted by the unit or disc.
Basic playback
Playing a Disc
1.
Slide the
POWER
ON/OFF
switch on the left side of unit to on mode.
2.
Slide the
AV IN / DVD
switch on the right side of unit to select DVD mode.
See CUSTOMIZING THE FUNCTION SETTINGS (page 27 to 28) before proceeding to step 3.
3.
Press the
OPEN
button on the unit to open the disc door.
4.
Hold the disc by its sides and carefully fit in onto the central spindle in the disc compartment, with the label
side facing up; press the disc down until you hear a “click”.
5.
Push the door to close.
It takes a short while for your unit to load the disc. After loading, on some discs, the unit will automatically
start playback of the disc.
6.
If disc play does not start automatically, press the
PLAY
button.
Pausing playback (still mode)
Press the
II
PAUSE
button. To resume normal playback, press the
PLAY
button.
Stopping playback
Press the
■
■
■
■
■
STOP
button to interrupt playback. To resume playback, press the
PLAY
button.
If you press the
■
■
■
■
■
STOP
button twice, the unit’s memory will be cleared and pressing the
PLAY
button will reset
the disc to the beginning.
To skip to a different track
• Press the
PREV
button repeatedly to skip to the start of the current or previous track.
• Press the
NEXT
button to skip to the next track.
• For audio CD disc, use the number buttons (remote control only) to jump straight to a particular track number.
(continued to next page)
(continued to next page)
(continued to next page)
(continued to next page)
(continued to next page)
DVD
CD
