MacroSystem Digital Video DVD-Arabesk 2, User Manual

Page: 5 / 28

5
1. General
Thank you for buying “
DVD-Arabesk 2”
!
We thank you for your trust and hope that this
product will meet your expectations.
This guide will show you how to easily create
your own DVD.
We are available for any questions or
suggestions you may have. You will find
addresses and telephone numbers in the
Casablanca manual.
Please have your device’s serial number or your
customer number ready when contacting us.
2. Installing and Starting the
Program
In order to install “ DVD-Arabesk 2 ” you will
need the SMART EDIT system software (at least
version 2.5).
Leave your Casablanca turned on and select the
“
Install Product ” button in “ System Settings ”.
After the corresponding window has appeared,
insert the installation SmartMedia card into the
Casablanca drive so that the gold contacts are
facing down and the folded corner is pointing
forward to the left (in the direction of the
Casablanca).
After you have inserted the card, you will see
the software “
DVD-Arabesk 2
” displayed in
the window. Select it in the list and click on
“
activate ”. A numeric keypad is displayed for
entering the key code you have obtained from
your dealer.
After that, a message is displayed indicating that
installation is finished. You can then remove
the SmartMedia card which will restart the
Casablanca system.
If you want to install “ DVD-Arabesk 2 ” as a
demo version only (also possible for Casablanca
systems without a DVD burner), select the
program in the list and click “
activate
”.
If you are working with SMART EDIT version 2.5
or higher, click on the “
Cancel ” button in the
displayed number code window.
If you are working with SMART EDIT version
3.1 or higher, click on the “
Demo ” button in the
displayed number code window.
The word Demo now appears after the program
name. Click on “
Ok ” to confirm and then
remove the SmartMedia card.
“ DVD-Arabesk 2 ” is now installed as a demo
version.
Note
: In demo mode only 200 MB of the total
4.7 GB DVD capacity are available for inserting a
film. Demo mode therefore allows you to work
with only very short projects!
In order to use the “ DVD-Arabesk 2 ” program,
enter the “ Finish ” menu of your Casablanca.
You will see the program “
DVD-Arabesk 2
”
displayed in the list in the lower left area. Select
it now if it has not already been automatically
selected.
After you have created the complete video with
transitions, titles and audiom, click on the “
Start
program ” button to the right in order to start
“ DVD-Arabesk 2 ”.
In case a message is shown indicating that your
firmware is too old, you can obtain this software
update free of charge from your dealer.
You will then be able to fully use or demo “ DVD-
Arabesk 2 ”.