Manual
Instructions for use
Vacuum Cushions
5
06052022V25IFU155100
MacroMedics ®
VI.
Once the desired hardness has been achieved, stop the vacuum pump and detach it from the
Vacuum Cushion. If using the Quick Infl ation Connectors, press the blue buttons on either side of the
part to detach it from the Vacuum Cushions’ valve.
VII.
Remember to keep the Vacuum Cushions’ valve out of the radiation treatment path.
5.2
ATTACHING THE VACUUM CUSHION TO THE SBRT SECURE ARCHES.
The instructions on this page and the next only apply to the following Vacuum Cushions:
• 123450
VacuumCushion, abdom.S
• 123470 VacuumCushion, abdom.XL
Dedicated plastic parts are required for attaching the Vacuum Cushions to the SBRT Secure Arch. These
plastic parts can be connected to the Vacuum Cushion by using Velcro pads, as shown in underneath
image.
I.
Before attaching the Vacuum Cushion to the Secure Arch, check the orientation of the indication
arrows, as shown in the image below:
The orientation is correct when the arrows point in the same direction.
