Manual
Instructions for use
Vacuum Cushions
4
06052022V25IFU155100
MacroMedics ®
5. Instructions for Use
5.1
INFLATION/DEFLATION OF THE VACUUM CUSHIONS AND PATIENT POSITIONING.
I.
Flatten out the Vacuum Cushion and make sure that the fi lling is evenly distributed.
II.
Position the patient on the Vacuum Cushion.
III.
Connect the Vacuum Cushion to the pump. If necessary, use a Quick Infl ation Connector as shown
in the image below:
Quick infl ation connector, male part
Quick infl ation connector, female part
IV.
Start the vacuum pump and generate a slight vacuum, then stop the pump.
V.
Start molding the Vacuum Cushion around the patient’s body/region of interest. Build an adequate
rim around the body to ensure precise positioning for future use with that patient.