manualshive.com logo in svg

MACROMEDIA COLDFUSION MX-CLUSTERCATS, Use Manual

Share
Download
MACROMEDIA COLDFUSION MX-CLUSTERCATS Use Manual Download Page 123

Changing restricted/unrestricted settings

113

Changing restricted/unrestricted settings

ClusterCATS lets you stop a cluster member from receiving HTTP requests by changing 
the restricted/unrestricted setting. You may want to restrict a server when performing 
server maintenance or software updates, verifying load configurations, or as an alternative 
method to managing load.

Only cluster members in active mode can be restricted, because cluster members in 
passive mode do not receive any ClusterCATS Server intervention.

This section describes the following:

•

“Restricting/unrestricting servers in Windows” on page 113

•

“Restricting/unrestricting servers in UNIX” on page 114

Restricting/unrestricting servers in Windows

To change restriction settings for a cluster member:

1 Open the ClusterCATS Explorer and select a cluster member.

2 Select 

Configure > State

 or right-click a cluster member and select 

Configure > State

.

The Server Properties dialog box appears:

3 Select the Active Member option if the server has been in passive state.

4 To ensure that HTTP requests sent explicitly to this cluster member are redirected to 

another server within the cluster, select Restricted in the Server Access area.

The cluster member icon changes to 

 in the ClusterCATS Explorer, indicating 

that the cluster is active but restricted.

5 To allow the server to participate in the cluster, select Unrestricted in the Server 

Access area.

6 Click OK.

Summary of Contents for COLDFUSION MX-CLUSTERCATS





























































































































































Reviews:

No comments

Brands by name

Popular brands

Load more brands