82
Using the ColdFusion Extensions for Flex Builder
Starting the ColdFusion/Flex Application wizard
To start the ColdFusion/Flex Application wizard:
1.
Configure your RDS servers. For more information, see
“Configuring RDS” on page 76
.
2.
In Flex Builder, select File > New > Other.
3.
Under ColdFusion Wizards, select ColdFusion/Flex Application Wizard, and then click
Next.
4.
After reading the introductory text, click Next.
5.
To load the settings from an application you previously created using the ColdFusion/Flex
Appliation wizard, select the configuration file, and then click Load ColdFusion/Flex
Application Wizard Settings.
6.
Click Next.
7.
Select the RDS server on which you want the application to reside.
8.
Specify the data source to use. The data source is configured in the ColdFusion MX
Administrator.
Although you specify one default data source at this point, you can access data from other
data sources in your application.
9.
Click Next.
Specifying form layout
The Form Layout dialog box lets you specify the pages to use in your application. You can
create master, detail, or master/detail pages. In your application, you can link master, detail,
and master/detail pages as follows:
Page type
Can link to
master
master
master/detail
detail
master and detail
master and master/detail
master/detail
master
master/detail