MACROMEDIA COLDFUSION MX 61 - CONFIGURING AND ADMINISTERING COLDFUSION..., Using Manual

Page: 25 / 70

Installing ColdFusion MX 6.1 25
14
Open the ColdFusion MX Administrator in a browser, using
http://localhost/CFIDE/administrator/index.cfm if you configured an external web server and
http://localhost:8500/CFIDE/administrator/index.cfm if you are using the built-in web server.
Because opening the ColdFusion MX Administrator for the first time automatically invokes the
Configuration Wizard, it is best to open the Administrator at this time.
Note: If you are accessing ColdFusion MX 6.1 from a remote computer, use the previous URL with
the host name or IP address of the remote computer instead of localhost .
15
Run the Configuration Wizard.
If you are upgrading from ColdFusion 4.5 or 5, you can optionally migrate settings later. To
migrate later:
a
Close the ColdFusion MX Administrator, if it is not already closed.
b
Open cf_root /lib/adminconfig.xml in a text editor , change
runmigrationwizard
(migrate
ColdFusion 5 settings) and
runmxmigrationwizard
(migrate the ColdFusion MX ODBC
services to ColdFusion MX 6.1) to true, as necessary, and save the file.
c
Restart the ColdFusion MX Administrator.
You are prompted again to migrate your settings.
Caution: If you migrate your ColdFusion 5 settings later, you might overwrite new ColdFusion MX
settings.
16
Configure and manage your system, as described in Chapter 4, “Configuring Your System,”
on page 49 .
17
To learn about ColdFusion MX 6.1, read the documentation, which is accessible through the
Documentation link at the top of the ColdFusion MX Administrator.
Mounting the CD drive on HP-UX
To accommodate long filenames, Macromedia writes ColdFusion MX 6.1 to the CD using the
RockRidge format. This format is supported by HP-UX using the Portable File System (PFS)
commands, not the standard HP-UX mount/umount commands. For more information on PFS
commands, enter the following command:
man pfs_mount
.
To mount the CD drive on HP-UX using the HP PFS extensions:
1
Create a mount point for the CD drive; for example:
mkdir /SD_CDROM
2
Create an entry in the PFS mount file, as follows:
a
Create or edit the file /etc/pfs_fstab, adding an entry like the following:
/dev/dsk/c1t2d0 /SD_CDROM pfs-rrip xlat=unix 0
(In this example, /dev/dsk/c1t2d0 is the <device_file>, /SD_CDROM is the
<mount_point>, pfs-rrip is the <fs_type>, and xlat=unix 0 is the <translation_method>.)
b
In your entry, ensure that the path that you set in the device_file field is the device name of
your CD drive, and that your mount_point is the name that you selected for the mount
point in step 1.
3
Start the PFS processes, as follows:
nohup /usr/sbin/pfs_mountd &
nohup /usr/sbin/pfsd &