GB-28
unit might not give its optimum performance.
The cords must not cover up the area shown in the
figure below. This is necessary to allow the amplifiers to
radiate freely.
Install the Unit
1. Install the mounting bracket into the dashboard of
the car. And adjust the mounting bracket to horizontal
2. Fix the mounting bracket into place by pressing its
tags outwards
3. Slide the main unit slowly inside the mounting
bracket until the tags on either sides of the bracket lock
into the respective holes on the sides of the main unit.
4. Install the removable trim ring
Detach the unit
1. Detach the removable trim ring
2.Insert the keys supplied to the unit at both sides of the
unit (shown as illustrated) until they click. Pulling the
keys makes it possible to remove the unit from the
dashboard.
