GB-16
select the six preset stations.
7.2 To select the exact station, press GOTO button on
the remote control then enter the exact frequency
numbers.
RDS (RADIO DATA SYSTEM) OPERATION
The RDS allows you to receive a variety of information
such as traffic information, station names, and to retune
automatically to a stronger transmitter that is
broadcasting the same program.
Tips
The RDS digital data includes the followings:
PI Program Identification
PS Program Service Name
AF List of Alternative Frequencies
TP Traffic Program
TA Traffic Announcement
PTY Program Type
EON Enhanced Other Networks
Turn on/off the AF function
* Press AF button to switch on/off AF function.
*The tuner will search for a station with RDS information
* The tuner will retune frequencies when ever the
reception signals getting worse.
Receiving Traffic information
1. Press the TA button to switch on TA mode.
2. The unit search for traffic information station
automatically. When a traffic information station is tuned
in, the TP mark display on touchable screen. If you do
not want to listen to the traffic information being received,
press TA button to skip that traffic information message.
The TA function will remain in the ON position. And the
unit will be back to previous mode.
3. Press it again to switch off TA mode.
* Traffic information is heard only when it is being
broadcast.
In other mode, Traffic announcement can interrupt the
source sound output when broadcast. After broadcasted,
the unit will automatically return to the original source
play before the traffic information broadcast began.
PTY (Program Type) Tuning
The PTY function allows you to search for stations with
a particular Program Type. Touch Page1 button on the
radio display screen to switch to the RDS screen.
1. Press PTY button on touchable screen or on the
remote control to select a program type. After selecting
the program type for 3 seconds, the unit will search for a
station in the selected program type.
*If the PTY station is found, the tuner will be stopped
searching.
*If the PTY station is not found,” No Pty” will be display
on the screen.
