USER MANUAL
PD-SATA USB/LAN
To reset the device,
to its factory default
on the
ower and wait for
e LED to stop
blinking (~30 sec).
Release the button
settings, press and
hold the reset
button, turn
p
th
and reboot the LAN
disk.
By default, the
ncoding is set to
nglish. If you want
to store or transfer
files with a different
encoding (different
e
of your
les, the transfer
can not be
completed and file
names will be
corrupted.
tion
4.2.1 Status
e
E
language), choose
the corresponding
language from the
drop down list.
If the encoding
does not match th
language
fi
4.2 Web Configura
Open your web browser, enter the IP address of your network
drive and login. The default login is admin/admin.
•
Host Name:
This name is used to identify your device on the
network. If you prefer a different name that is easier to
identify, click on Change and type in a new name.
•
Group Name:
This should be the same name as your
workgroup. In general, the default, WORKGROUP will be OK
but if your workstation belongs to a different group, click on
Change to modify the workgroup.
On a PC, right click on My Computer and choose Properties.
Go to the Computer Name tab to see your current workgroup.
tilities). Select SMB
and click Configure to modify the settings (administrator
access is required to access this option).
For a Mac to join a Windows workgroup, open the directory
access utility (under Applications
Æ
U
Page 12 / Chapter 4 - LAN Disk Setup
