Driver Upgrade
It is recommended that all users use the same driver revision.
Before upgrading the driver, please follow these guidelines:
•
If possible, first backup all your data.
•
Disable all NDAS devices.
•
Uninstall the present driver.
•
Install the new driver.
•
Register the NDAS devices again.
•
Mount the NDAS devices.
•
You should now be able to use the NDAS devices again.
PC Command Line Utility
For advanced users on a PC, there is an option to run the
NDAS software from a command line interface.
•
Open the command line and type following:
cd C:\Program Files\NDAS\System
(Folder may vary depending on driver being used)
•
Type ndascmd.exe, which will load the command line
interface for the NDAS software
The Syntax for the interface should be as follows:
ndascmd <command> [parameters]
The supported commands are following:
•
register <name> <device id without dash> [write key]
•
unregister <device number>
•
list devices
•
list logicaldevices
•
mount <logical device number> [ro|rw]
•
unplug <logical device number>
•
unmount <logical device number>
•
activate <device number>
•
deactivate <device number>
- 14 -
