Maco SMART DEADBOLT, Installation And User Manual

Page: 14 / 20

13. Rear Lock
When assembled, thumb turn knob to test if it is in the right position.
If you con NOT turn the knob properly, please pull the PIN out, turn 90°
and re-insert and rechek. Once the bolt is moving properly, the knob is
in the right position.
5/16”(8mm)
x2
x1
25/32”(20mm)
2*!
Keep the bolt closed
2) Turn the knob properly
- If you turned the toggle to R in step 12, turn the knob clockwise to the
end (Fig. 1)
- If you turned the toggle to L in step 12, turn the knob counterclockwise
!
to the end (Fig. 2)
Toggle on
R position
Fig. 1
Toggle on
L position
Fig. 2
1) Keep the bolt closed
2) Turn the knob as
Fig.1 or Fig. 2