Maco RAIL-SYSTEMS S&T-S, Operating And Maintenance Instructions Manual

Page: 12 / 20

- 12 -
Cleaning informations
Regular cleaning is a prerequisite for preserving the service life and
functionality of the window. When cleaning the glass surfaces and
the other surfaces, also check the hardware components for
contamination and, if necessary clean with a damp cloth and a
pH-neutral cleaning agent. Only close the window or casement door
once the cleaned parts are dry.
To maintain the surface quality of the hardware components for the
intended use in the long-term and to avoid deterioration, the
following points must be observed:
Protection against corrosion:
›
Ventilate the hardware and the rebate areas so that they are not
exposed to direct moisture or condensation (important during the
building stage).
› Clean the hardware components with a moist cloth only, avoid
permanent wetness!
Protection against soiling:
›
The hardware should generally be kept free of deposits (e.g. salt in
coastal areas) and soiling. Immediately remove soiling during the
building stage caused by plaster, mortar or similar with water.
› Protect hardware and striker plates from contamination (dust,
dirt, paint, etc.).
Protection against corrosive, acidiferous cleaning agents:
›
Clean the hardware with a soft, lint-free cloth and a mild,
pH-neutral cleaning agent in diluted form only. Never use
aggressive, acidic or solvent-based or abrasive cleaners (scouring
pads, steel wool, etc.). This can result in damage to the hardware!
› If hardware is damaged in this manner, it may impair the function
and/or impair the safety-relevant characteristics, and as a
consequence, this can result in personal injury and damage of
other items.