Macnaught IM50, Instruction Manual

Page: 4 / 8

4
e) Press and hold down RESET until “program” disappears
to accept setting.
2. TOTALS SETTINGS
totL2
a) Press and hold down RESET for 5 seconds until “totL2”
appears.
21 BATCH TOTAL = unit 21 (set units)
c) Press and hold down RESET for 2 seconds ( program will
appear)
d) Press RESET to scroll through the settings (ltr, gal, qrt) to
the desired units
b) Press RESET “ unit 21” will appear.
22 BATCH TOTAL = dEC 22 (set decimal point)
b) Press RESET twice “ dEC 22” will appear.
c) Press and hold down RESET for 2 seconds ( program will
appear)
d) Press RESET to set the decimal point to 1st, 2nd, 3rd or
no decimal place. (e.g 11111.1 = 1 decimal place)
2
3 RESETABLE ACCUM TOTAL = unit 23 (set units)
b) Press RESET 3 times “ unit 23” will appear.
c) Press and hold down RESET for 2 seconds ( program will
appear).
d) Press RESET to scroll through the settings ( ltr, gal, qrt )
to the desired units.
24 RESETABLE ACCUM TOTAL = dEC 24
( set decimal point )
b) Press RESET 4 times “ dEC 24” will appear.
c) Press and hold down RESET for 2 seconds ( program will
appear)
d) Press RESET to set the decimal point to 1st, 2nd, 3rd or
no decimal place (e.g. 11111.1 = 1 decimal place).
25 NON-RESET ACCUM TOTAL = unit 25 (set units)
b) Press RESET 5 times “ unit 25” will appear.
c) Press and hold down RESET for 2 seconds ( program
will appear).
d) Press RESET to scroll through the settings (ltr, gal, qrt) to
the desired units.
26 NON-RESET ACCUM TOTAL = dEC 26
(set decimal point)
b) Press RESET 6 times “ dEC 26” will appear.
c) Press and hold down RESET for 2 seconds ( program will
appear).
d) Press RESET to set the decimal point to 1st, 2nd, 3rd or
no decimal place (e.g. 11111.1 = 1 decimal place).
27 “K” FACTOR = kFac 27
(normal setting is 112.00 pulses)
b) Press RESET 7 times “ kFac 27” will appear.
c) Press and hold down RESET for 2 seconds ( program will
appear)
d) To change the ‘K’ factor, press RESET ( digit will flash),
to change digit press RESET.
Press DISP to scroll to the next number. Press RESET
to change the value
To change the decimal point, press DISP until it is
in the required position. Press RESET to set the decimal
point.
e) Press and hold down RESET until “program” disappears
to accept setting.
e) Press and hold down RESET until “program” disappears
to accept setting.
e) Press and hold down RESET until “program” disappears
to accept setting.
e) Press and hold down RESET until “program” disappears
to accept setting.
e) Press and hold down RESET until “program” disappears
to accept setting.
e) Press and hold down RESET until “program” disappears
to accept setting.
f) Press RESET for five seconds to return the meter to the
operating mode.
f) Press RESET for five seconds to return the meter to the
operating mode.
f) Press RESET for five seconds to return the meter to the
operating mode.
f) Press RESET for five seconds to return the meter to the
operating mode.
f) Press RESET for five seconds to return the meter to the
operating mode.
f) Press “RESET” for five seconds to return the meter to the
operating mode.
f) Press RESET for five seconds to return the meter to the
operating mode.
a) Press and hold down RESET for 5 seconds until “totL2”
appears.
a) Press and hold down RESET for 5 seconds until “totL2”
appears.
a) Press and hold down RESET for 5 seconds until “totL2”
appears.
a) Press and hold down RESET for 5 seconds until “totL2”
appears.
a) Press and hold down RESET for 5 seconds until “totL2”
appears.
a) Press and hold down RESET for 5 seconds until “totL2”
appears.