®
Fitting method - Option A
Please follow the how to fit from seated or laying position then refer to this section for the leg fitting.
Feed the outer leg webbing through the short red loop of the inner leg webbing as in pictures 1 and 2.
Attach the long outer webbing to the spreader bar by the appropriate loop. Repeat operation for the other leg.
1
2
3
Short loop leg webbing fitting methods
Fitting method - Option B
Please follow the ‘how to fit from seated or laying position’ instructions then refer to this section for the leg
fitting.
Feed one of the inner leg webbings through the short red loop of the other inner leg webbing so that the left leg
inner webbing rests on the right leg and vice-versa, pictures 1 and 2.
Feed each of the outside leg webbing through the white loop on the short inner leg loop, as shown in pictures 3
and 4.
Please note that as there are many hoist and spreader bar designs available, it is the clinician/carer’s responsibility
to ensure that any sling is correctly fitted on the patient and relevant spreader bar. An appropriate risk assessment
should be carried out prior to use and indeed application. The carer/clinician conducting the lift operation is
responsible for the correct use of the sling at all times. Other applications of the sling can be considered at the
discretion of the clinician, however all responsibility differing from this user instruction is taken solely by them at
that time.
1
2
3
4
5
