www.mackie.com
PHONE:
425.487.4333 •
TOLL-FREE:
800.898.3211
ThumpBST Speaker Setup Guide
Knowledge Base
http://mackie.com/products/thump
After you have everything powered on, you are ready to make some noise! But before doing so, check
out this link on properly gain staging your mixer, so you will not clip or overload your mixer or speakers:
https://supportloudtech.netx.net/loud-public/#/asset/16528
For setting levels on your speakers, see our document here:
https://supportloudtech.netx.net/loud-public/#/asset/8234
Connecting your Thump15BST Loudspeakers Together
Page 6
When using two Thump Boosted speakers together there are two ways you can connect them. You can either use an XLR cable
to connect the two speakers physically or use the wireless function to link both units together. For more information on how to
link two Thump Boosted speakers together via Bluetooth, see our document here:
For physically connecting the two Thump Boosted speakers you simply will take the “Mix Out” connector from your main unit
over to the CH 1 input on the second speaker using an XLR cable.
If connecting your Thump15BST loudspeakers with an XLR cable, you will want to make sure to make your connection BEFORE
powering your speakers on.