www.mackie.com
PHONE:
425.487.4333 •
TOLL-FREE:
800.898.3211
ThumpBST Speaker Setup Guide
Knowledge Base
http://mackie.com/products/thump
1)
Using two of the XLR cables patch from the XLR main outputs left and right on the back of the ProFX8v2 to one
of the Thump15BST’s CH1 and CH2 inputs (this will be our “main” Thump Boosted). Left main from the ProFX will patch
into input CH1 on the Thump15BST and Right main from the ProFX to input CH2 on the same Thump15BST.
ProFX XLR Main Outs
Thump15BST Rear Panel
2)
Using one more XLR cable, we are going to patch from the “Mix Out” connector on your second Thump15BST into
the Thump18S’ input A.
Thump15BST Rear Panel
Thump18S Rear Panel
Page 3