background image

5

The Cabinet

The SRM450v cabinet was designed to be the strongest 

molded composite cabinet on the planet. This material is as 
strong as concrete, and rigid enough to prevent unwanted 
vibrations in the cabinet. It has built-in fly points for hang-
ing, and a socket in the bottom for mounting on a tripod 
stand. Although it is an exceptional choice for installed 
sound situations, its light weight and durable finish also 
make it ideal for portable sound system use. The asym-
metrical trapezoidal design of the cabinet makes it easy to 
use as a floor wedge for stage monitor applications.

The Active Advantage

There are a number of advantages to using an active 

speaker system over a passive loudspeaker:   

 

•  The internal crossover is active, and its low power cir-

cuitry operates on line-level signals. It does not waste 
speaker-level power like a passive crossover with large 
coils, caps, and resistors.

•  The input signals are crossed over before they reach the 

amplifiers, so each amplifier only receives the correct 
frequency range for its driver.

•  The amplifiers are designed specifically for these 

speaker load impedances. There is no guesswork as 
to what load each amplifier has to drive, so they can 
provide maximum acoustic output from the speakers, 
yet minimize the danger of speaker damage due to 
overdriving a lesser amplifier.

•  The connecting wires between the amplifier outputs 

and the drivers are kept to a minimum, so the damping 
factor of the amplifier isn’t compromised by the resis-
tance of long speaker cables. In addition, all the power 
from the amplifier is transferred directly to the drivers 
with no speaker cable losses.

•  The acoustic sum of the outputs from the two drivers 

is optimized electronically, as well as physically, so the 
amplitude response is flat and there is no lobing error.

•  The presence of active circuits within the speaker 

cabinet allow the designer to add on extra details, such 
as a high quality mic/line input section.

In short, all the complex interconnected components 

in the system are designed to work in harmony with each 
other to produce the best possible sound. (Even for Uncle 
Bert’s star performance on spoons!)

Summary of Contents for SRM450v2





















Reviews: