background image

16

Repair

drivers are located.

Dimensions

For warranty service, refer to the warranty informa-

tion on page 19.

Non-warranty service for Mackie products is avail-

able at a factory-authorized service center. To locate 
your nearest service center, visit www.mackie.com, click 
“Support” and select “Locate a Service Center.” Service 
for Mackie products living outside the United States can 
be obtained through local dealers or distributors.

If you do not have access to our website, you can call 

our Tech Support department at 1-800-898-11,  
Monday-Friday, normal business hours, Pacific Time, to 
explain the problem. Tech Support will tell you where 
the nearest factory-authorized service center is located 
in your area.

CARE AND MAINTENANCE

Your Mackie active speakers will provide many years of 

reliable service if you follow these guidelines:

Avoid exposing the loudspeakers to 
moisture. If they are set up outdoors, be 
sure they are under cover if you expect 
rain or you live in Washington.

•  Avoid exposure to extreme cold (below freezing tem-

peratures). If you must operate the loudspeakers in a 
cold environment, warm up the voice coils slowly by 
sending a low-level signal through them for about 15 
minutes prior to high-power operation.

•  Use a dry cloth to clean the cabinets. Only do this when 

the power is turned off. Avoid getting moisture into any 
of the openings of the cabinet, particularly where the 

Need help with your new SRM450v2?

•  Visit www.mackie.com and click Support to find:   

 

  FAQs, manuals, addendums, and other useful information. 
•  Email us at: [email protected].
•  Telephone 1-800-898-3211 to speak with one of our splendid  

  technical support representatives, (Monday through Friday,  

  normal business hours, PST).

14.8 in/376 mm

26

.0

 in

/6

60

 m

m

14

.8

 in

/3

76

 m

m

15.4 in/390 mm

15.4 in/390 mm

Summary of Contents for SRM450v2





















Reviews: