5
SPECIFICATIONS
System Specifications
Frequency Range
40Hz–20kHz
Frequency Response (–3 dB)
45Hz–18kHz
Horizonal Coverage Angle (–6 dB)
90º averaged 2kHz to 10kHz
Vertical Coverage Angle (–6 dB)
40º averaged 2kHz to 10kHz
Directivity Factor; DI (Q)
10.77 (11.95)
averaged 2kHz to 10kHz
Maximum SPL @ 1m
123 dB
Peak Output @ 1m
126 dB
Crossover Points
700Hz, 3000Hz
Dynamic Range
> 100 dB
Phase Response
±40º from 500Hz to
10kHz
Input Type
Balanced
differential
Input Impedance
50K ohms
Input Protection
Monitoring and
limiting of
continuous rms
output of the
amplifiers
Thermal Protection
Input stage
muting,
auto-reset
Transducer Specifications
Low-Frequency Transducer
Diameter
15” (381mm)
Voice Coil Diameter
2.5” (63mm)
Power Handling
250 watts rms
Mid-Frequency Transducer
Diameter
6” (152mm)
Voice Coil Diameter
2” (50mm)
Power Handling
60 watts rms
High-Frequency Transducer
Diaphragm Diameter
1” (25mm)
Voice Coil Diameter
1” (25mm)
Power Handling
25 watts rms
Diaphragm Material
Mylar
Power Amplifiers
Low-Frequency Power Amplifier
Burst Capability 300 watts
Rated THD
< 0.05%
Design
Class G, High
Efficiency/High
Current
Mid and High-Frequency Power Amplifiers
Burst Capability
100 watts
Rated THD
< 0.1%
Design: Integrated Module
Line Input Power
U S
120V, 60Hz
Recommended Amperage Service
8 amps
Europe
230V, 50Hz
Recommended Amperage Service
5 amps
Physical Properties
Height
43.9” (1116mm)
Front Width
19.1” (484mm)
Rear Width
13.9”(352mm)
Depth
18.1” (460mm)
Weight 100 lbs. (45.5kg)
Enclosure
18mm thick multi-layered
plywood, top and bottom
high pressure resin injected
“caps”
Enclosure Geometry
Trapezoidal, 10º angle
sides
Mounting Methods
Floor mount
Disclaimer
Since we are always striving to make our
products better by incorporating new and
improved materials, components, and
manufacturing methods, we reserve the right
to change these specifications at any time
without notice.
“Mackie” and the “Running Man” figure are
trademarks or registered trademarks of Mackie
Designs Inc.
All other brand names mentioned are
trademarks or registered trademarks of their
respective holders, and are hereby
acknowledged.
©2000 Mackie Designs Inc.
All Rights Reserved.
Printed in Italy.
