SR1530
5
O F 6 P A G E S
3-Way Active Sound Reinforcement Speaker System
LOUD Technologies continually engages in research related to product improvement. New material,
production methods, and design refinements are introduced into existing products without notice as
a routine expression of that philosophy. For this reason, any current LOUD Technologies product may
differ in some respect from its published description, but will always equal or exceed the original
design specifications unless otherwise stated. ©1999–2004 LOUD Technologies Inc. All rights
reserved. Mackie and the “Running Man” figure are registered trademarks of LOUD Technologies Inc.
3-Way Active Sound Reinforcement Speaker System
SR1530
SPEAKER
SR1530
6
O F 6 P A G E S
Part No. 091-224-00 Rev. B 09/04
www.mackie.com
16220 Wood-Red Road NE, Woodinville, WA 98072 USA
800.898.3211, fax 425.487.4337, [email protected]
UK
+44.1268.570.808, fax +44.1268.570.809, [email protected]
3-Way Active Sound Reinforcement Speaker System
SR1530
1
O F 6 P A G E S
SR1530
SPEAKER
Electronic files for this product available at:
www.mackie.com
This Specification Sheet SR1530_SS.PDF
Owner/Operator’s Manual SR1530_OM.PDF
Architects’ and Engineers’ Specifications
1. GENERAL CONFIGURATION.
The active, three-way,
full-range loudspeaker system shall incorporate one
15-inch low-frequency (LF) transducer, one horn-loaded
6-inch mid-frequency (MF) transducer, and a 1-inch exit
compression driver high-frequency (HF) transducer. The
LF driver shall be mounted in a vented combination of
multi-ply wood and high-pressure injected wood enclo-
sure tuned for optimum low-frequency response. The MF
and HF transducers shall be loaded on a one piece, com-
bination HF/MF horn assembly with optimized wavefront
characteristics. The system shall have a nominal cover-
age pattern of 90° (horizontal) x 40° (vertical). System
frequency response shall vary no more than ±3 dB from
45 Hz to 18 kHz measured on axis. The loudspeaker shall
incorporate a low-frequency amplifier capable of deliver-
ing 300 watts rms over a frequency range of 20 Hz–800
Hz. The system shall incorporate a 100 watt rms ampli-
fier specifically designed to power the MF driver over the
range of 700 Hz–3 kHz and a 100 watt rms amplifier spe-
cifically designed to power the HF driver over the range of
3 kHz-20 kHz. The amplifiers shall be mounted on an alu-
minum heat sink mounted within the speaker system. The
loudspeaker enclosure shall have a trapezoidal shape and
shall incorporate two side handles and top and bottom
relocation handles. The system shall include an XLR input
connector and an XLR loop through signal connector. The
front of the loudspeaker shall be covered with a powder
coated, weather resistant perforated steel grille.
2. DESIGNATION.
The active three-way full range loud-
speaker system shall be the Mackie SR1530.
115V - AC
DESIGNED BY MACKOIDS IN WOODINVILLE, WA, USA
AND MACKIE EUROPE
COPYRIGHT ©1998 • THE FOLLOWING ARE
TRADEMARKS OR REGISTERED TRADEMARKS
OF LOUD TECHNOLOGIES INC.:
"MACKIE", AND THE "RUNNING MAN" FIGURE •
PATENT PENDING
�������������
�������������
��������������
LOOP OUT
MAIN INPUT
PA
RA
LL
EL
ON
ON
PROTECTION
������
LI
N
E
LE
VE
L
SI
G
N
A
L
SERIAL NUMBER
MANUFACTURING DATE
��������������������������������������������
����������������������������������������
���������
�����������������������������������������������������
����������������������������������������������������������������
�������������������������������������������������������������������������
�����
������������������������������������������
RISK OF ELECTRIC SHOCK
DO NOT OPEN
�������������������������������������������
�������������������������������������������
CAUTION
