background image

User’s

Guide

7

10. Controlling Law and Severability.

 This License shall be governed by and construed in accordance with the 

laws of the United States and the State of Washington, as applied to agreements entered into and to be performed 
entirely within Washington between Washington residents. If for any reason a court of competent jurisdiction 
fi nds any provision of this License, or portion thereof, to be unenforceable, that provision of the License shall be 
enforced to the maximum extent permissible so as to effect the intent of the parties, and the remainder of the 
License shall continue in full force and effect.

11. Complete Agreement.

 This License constitutes the entire agreement between the parties with respect to the 

use of the Software and related documentation, and supersedes all prior or contemporaneous understandings or 
agreements, written or oral, regarding such subject matter. No amendment to or modifi cation of this License will 
be binding unless in writing and signed by a duly authorized representative of LOUD Technologies Inc.

Phew!

LOUD Technologies Inc. • 16220 Wood-Red Road NE • Woodinville • WA 98072 • USA 

 

 

© 2004 LOUD Technologies Inc. All Rights Reserved.

Summary of Contents for Spike














































































Reviews: