Mackie SA1232 User Manual Download Page 3

3

Lend Me Your Ears

Exposure to extremely

high noise levels may cause
permanent hearing loss. In-
dividuals vary considerably
in susceptibility to noise-

induced hearing loss, but nearly everyone
will lose some hearing if exposed to suffi-
ciently intense noise for a period of time.
The U.S. Government’s Occupational
Safety and Health Administration (OSHA)
has specified the permissible noise level ex-
posures shown in this chart.

According to OSHA, any exposure in ex-

cess of these permissible limits could result
in some hearing loss. To ensure against po-
tentially dangerous exposure to high
sound-pressure levels, it is recommended
that all persons exposed to equipment ca-
pable of producing these levels use hearing
protectors while this unit is in operation.
Ear plugs or protectors in the ear canals or
over the ears must be worn when operating
this amplification system in order to pre-
vent a permanent hearing loss if exposure is
in excess of the limits set forth here.

Contents

SAFETY INSTRUCTIONS .............................................................................................................2
INTRODUCTION ...........................................................................................................................4
REAR PANEL DESCRIPTION ........................................................................................................5
HOOKUP DIAGRAM .....................................................................................................................5
CONNECTIONS ............................................................................................................................6
PLACEMENT .................................................................................................................................6
AC POWER ...................................................................................................................................7
THERMAL CONSIDERATIONS .....................................................................................................8
SERVICE INFORMATION .............................................................................................................9

Warranty Service .............................................................................................................9
Troubleshooting ...............................................................................................................9
Repair ............................................................................................................................10

CARE AND MAINTENANCE .......................................................................................................10
SA1232 SPECIFICATIONS .........................................................................................................11

Architects and Engineers’ Specifications ......................................................................12
Graphs ...........................................................................................................................13

SA1232 LIMITED WARRANTY ...................................................................................................15

Don’t forget to visit our website at 

www.mackie.com

for more information about this and other Mackie products.

Duration Per Day

Sound Level dBA, Typical

  In Hours

  Slow Response

Example

8

90

Duo in small club

6

92

4

95

Subway Train

3

97

2

100

Very loud classical music

 1.5

102

1

105

Patrice screaming at Ron about deadlines

0.5

110

 0.25 or less

115

Loudest parts at a rock concert

The SA1232

can produce a

maximum SPL of

136 dB @ 1m

Part No. 0000431  Rev. B  4/03

© 2003 Mackie Designs Inc. All Rights Reserved.

Summary of Contents for SA1232

















Reviews: