Mackie SA1232 User Manual Download Page 2

2

SAFETY INSTRUCTIONS

1. Read Instructions — All the safety and operation instructions
should be read before this Mackie product is operated.

2. Retain Instructions — The safety and operating instructions
should be kept for future reference.

3. Heed Warnings — All warnings on this Mackie product and in
these operating instructions should be followed.

4. Follow Instructions — All operating and other instructions
should be followed.

5. Water and Moisture — This Mackie product should not be used
near water – for example, near a bathtub, washbowl, kitchen sink,
laundry tub, in a wet basement, near a swimming pool, swamp, or
salivating St. Bernard dog, etc.

6. Cleaning — Clean only with a dry cloth.

7. Ventilation — This Mackie product should be situated so that its
location or position does not interfere with its proper ventilation. For
example, the Component should not be situated on a bed, sofa,
rug, or similar surface that may block any ventilation openings, or
placed in a built-in installation such as a bookcase or cabinet that
may impede the flow of air through ventilation openings.

8. Heat — This Mackie product should be situated away from heat
sources such as radiators or other devices which produce heat.

WARNING:

 The heatsink may reach high temperatures during

standard use. To ensure proper operation, allow a minimum of 6
inches of clearance from the heatsink surface and adequate
ventilation.

9. Power Sources — This Mackie product should be connected to a
power supply only of the type described in these operation
instructions or as marked on this Mackie product.

10. Power Cord Protection — Power supply cords should be routed
so that they are not likely to be walked upon or pinched by items
placed upon or against them, paying particular attention to cords at
plugs, convenience receptacles, and the point where they exit this
Mackie product.

11. Object and Liquid Entry — Care should be taken so that
objects do not fall into and liquids are not spilled into this Mackie
product.

12. Damage Requiring Service — This Mackie product should be
serviced only by qualified service personnel when:

A. The power-supply cord or the plug has been
damaged; or

B. Objects have fallen, or liquid has spilled into this
Mackie product; or

C. This Mackie product has been exposed to rain; or

D. This Mackie product does not appear to operate
normally or exhibits a marked change in performance;
or

E. This Mackie product has been dropped, or its chassis
damaged.

13. Servicing — The user should not attempt to service this
Mackie product beyond those means described in this operating
manual. All other servicing should be referred to the Mackie Service
Department.

14. To prevent electric shock, do not use this polarized plug with an
extension cord, receptacle, or other outlet unless the blades can be
fully inserted to prevent blade exposure.

Pour prévenir les chocs électriques ne pas utiliser cette fiche
polariseé avec un prolongateur, un prise de courant ou une autre
sortie de courant, sauf si les lames peuvent être insérées à fond
sans laisser aucune pariie à découvert.

15. Grounding or Polarization — Precautions should be taken so
that the grounding or polarization means of this Mackie product is
not defeated.

16. Power Precaution — Unplug this Mackie product during
lightning storms or when unused for long periods of time. Note that
this Mackie product is not completely disconnected from the AC
mains service when the power switch is in the OFF position.

17. This apparatus does not exceed the Class A/Class B (whichever
is applicable) limits for radio noise emissions from digital apparatus
as set out in the radio interference regulations of the Canadian
Department of Communications.

ATTENTION 

Le présent appareil numérique n’émet pas de

bruits radioélectriques dépassant las limites applicables aux
appareils numériques de class A/de class B (selon le cas) prescrites
dans le règlement sur le brouillage radioélectrique édicté par les
ministere des communications du Canada.

WARNING 

— 

To reduce the risk of fire or

electric shock, do not expose this appliance to

rain or moisture.

WARNING 

— 

The cabinet has no rigging

points and is not suitable for flying. Never

attempt to suspend the cabinet by its handles.

The SA 1232 should never be pole-mounted.

CAUTION    

AVIS

RISK OF ELECTRIC 

SHOCK 

DO NOT OPEN

RISQUE DE CHOC ELECTRIQUE

NE PAS OUVRIR

CAUTION: TO REDUCE THE RISK OF ELECTRIC SHOCK

DO NOT REMOVE COVER (OR BACK)

NO USER-SERVICEABLE PARTS INSIDE

REFER SERVICING TO QUALIFIED PERSONNEL

ATTENTION: POUR EVITER LES RISQUES DE CHOC

ELECTRIQUE, NE PAS ENLEVER LE COUVERCLE.  AUCUN

ENTRETIEN DE PIECES INTERIEURES PAR L'USAGER.  CONFIER

L'ENTRETIEN AU PERSONNEL QUALIFIE.

AVIS: POUR EVITER LES RISQUES D'INCENDIE OU

D'ELECTROCUTION, N'EXPOSEZ PAS CET ARTICLE 

A LA PLUIE OU A L'HUMIDITE

   The lightning flash with arrowhead symbol within an equilateral 
triangle is intended to alert the user to the presence of uninsulated
"dangerous voltage" within the product's enclosure that may be 
of sufficient magnitude to constitute a risk of electric shock to persons.

   Le symbole éclair avec point de flèche à l'intérieur d'un triangle 
équilatéral est utilisé pour alerter l'utilisateur de la présence à 
l'intérieur du coffret de "voltage dangereux" non isolé d'ampleur 
suffisante pour constituer un risque d'éléctrocution.

   The exclamation point within an equilateral triangle is intended to 
alert the user of the presence of important operating and maintenance 
(servicing) instructions in the literature accompanying the appliance.

   Le point d'exclamation à l'intérieur d'un triangle équilatéral est 
employé pour alerter les utilisateurs de la présence d'instructions 
importantes pour le fonctionnement et l'entretien (service) dans le 
livret d'instruction accompagnant l'appareil.

Summary of Contents for SA1232

















Reviews: