background image

13

Thermal Protect

All amplifiers produce heat. The HR624 is

designed to be efficient both electrically and
thermally.
• If for some reason the heatsinks get too hot,

a thermal switch activates, placing the
HR624 into Standby mode (indicated when
the green 

POWER

 LED 

 turns off).

• Should this happen, make sure that airflow

to the rear of the cabinet is not restricted.

• When the heatsinks cool down to a safe

temperature, the switch resets and normal
operation resumes.

Integrated Magnetic Shielding

The HR624 Studio Monitor contains drivers

with large magnet structures. The drivers’ mag-
nets are shielded to help prevent the magnetic
field from radiating out into the environment
and playing havoc with computer monitors or
TV screens. Unshielded speakers can cause
distortion in both the shape and color of the
picture if placed too close to a CRT (cathode
ray tube). If you have a particularly sensitive
computer monitor or TV screen, it may be nec-
essary to move the speakers a few inches away.

Input Signal Wiring

You should use high-quality, shielded cable

to connect the signal source to the 

SIGNAL

INPUT

 jack 

 on the HR624.

• Foil shielded cables, such as Belden 8451,

8761, or 9501 are commonly used for studio
wiring.

• Microphone cables work well.

• The better the shield, the better the

immunity from externally induced noise
(like EMI and RFI). Route the cable away
from AC power cords and outlets. These are
common sources for hum in an audio
signal. Wall warts and line lumps are
especially insidious hum inducers!

You can purchase quality cables from your
Mackie dealer.

• In certain home theater applications, it

may be necessary to connect the speaker
outputs from a stereo receiver to the inputs
of the HR624s, if the receiver doesn’t have
preamp outputs or other line-level output
connections.

CAUTION:

 Do not attempt

to connect a speaker output
directly to the input of the
HR624! Speaker levels are
much higher than line levels

and can damage the input circuitry in the HR624.

You can, however, insert a speaker-level to

line-level signal attenuator between the
receiver’s speaker output and the HR624’s input.
Your Mackie dealer may be able to help you find
one, or you can build your own. Contact our tech
support department for more information.

Summary of Contents for HR624





















Reviews: