Owner’
s Manual
3
Introduction
Thank you for choosing the Mackie Hotwire
PB-1 multi-function remote pedalboard for the
Hotwire VT12 professional guitar amplifier.
The PB-1 has a variety of functions includ-
ing channel and bank selection, EFX enable/
bypass, Tap/Tempo setting, tuner select, loop
recording, and a multi-function Wah/Volume
pedal. Each of these functions is described in
more detail later on in this manual.
Connection
The PB-1 comes with a 25-foot Cat5 Ether-
net cable (the same cable used to connect a
computer to a network). Simply connect the
cable between the “PEDAL” jack on the back
of the VT12 and the “AMPLIFIER” jack on
the back of the PB-1, as shown below. Power
is provided to the PB-1 through the cable. No
external power or “wall-wart” is required.
LINE OUTPUT
UNIVERSAL SUPPLY
EXTERNAL
SPEAKER
USB/PEDAL
PHONES
LINE INPUT
MIC INPUT
INSERT
LOOP
+4dBu BALANCED
BAL/UNBAL
BAL/UNBAL
+4dBu
MAX
+10dB
-10dB
OO
+60dB
OO
PEDAL
LEFT
RIGHT
LEFT
RIGHT
GAIN
SEND
RETURN
LEVEL
GAIN
USB
90-260VAC 50/60Hz
MAINS
4 Ohms OR GREATER
This device complies with part 15 of the FCC Rules. Operation
is subject to the following two conditions:
(1) This device may not cause harmful interference, and
(2) This device must accept any interference received, including
interference that may cause undesired operation.
US
C
3031613
CONFORMS TO
IEC 60065
AVIS: RISQUE DE CHOC ELECTRIQUE — NE PAS OUVRIR
WARNING
:
TO REDUCE THE RISK OF FIRE OR ELECTRIC SHOCK, DO NOT
EXPOSE THIS EQUIPMENT TO RAIN OR MOISTURE. DO NOT REMOVE COVER. NO
USER SERVICEABLE PARTS INSIDE. REFER SERVICING TO QUALIFIED PERSONNEL.
SERIAL NUMBER
MANUFACTURING DATE
VT12
PB-1
AMPLIFIER
PEDAL
SERIAL NUMBER
MANUFACTURING DATE
