Mackie DRM212, Owner'S Manual

Page: 9 / 28

Owner
’s Manual
9
Owner’s Manual
Large Club System
PUSH FOR SETTINGS
50-60 Hz 110W
100-240VAC
SPEAKER CONTROL
INPUT
DIRECT OUT
INPUT
DIRECT OUT
HIGH-PASS OUT HIGH-PASS OUT
PUSH FOR SETTINGS
50-60 Hz 110W
100-240VAC
SPEAKER CONTROL
INPUT
DIRECT OUT
INPUT
DIRECT OUT
HIGH-PASS OUT HIGH-PASS OUT
PUSH FOR SETTINGS
50-60 Hz 110W
100-240VAC
SPEAKER CONTROL
INPUT
DIRECT OUT
INPUT
DIRECT OUT
HIGH-PASS OUT HIGH-PASS OUT
PUSH FOR SETTINGS
50-60 Hz 110W
100-240VAC
SPEAKER CONTROL
INPUT
DIRECT OUT
INPUT
DIRECT OUT
HIGH-PASS OUT HIGH-PASS OUT
PUSH FOR SETTINGS
MAX OFF
MIX OUT DIRECT OUT DIRECT OUT
INPUT INPUT
SPEAKER CONTROL
GAIN GAIN
INPUT
GAIN
LINE MIC
U
+50dB OFF
LINE MIC
+50dB OFF
U
PUSH FOR SETTINGS
MAX OFF
MIX OUT DIRECT OUT DIRECT OUT
INPUT INPUT
SPEAKER CONTROL
GAIN GAIN
INPUT
GAIN
LINE MIC
U
+50dB OFF
LINE MIC
+50dB OFF
U
LIVE SHOW
SPEAKER VOICING
SPEECH
CL
UB
MON
LIVE
PUSH FOR SETTINGS
SPEAKER CONTROL
PUSH FOR SETTINGS
SPEAKER CONTROL
MONITOR POSITION
SPEAKER VOICING
MON
SPEECH
LIVE
CL
UB
PUSH FOR SETTINGS
SPEAKER CONTROL
SUBWOOFER HPF
DRM SUB
VAR OFF
DRM
SUB
Hookup Diagrams continued...
Here’s how to set up a large club system. In this example, the L/R outputs of a DL16S mixer are connected directly
to the CH1 inputs of a pair of DRM18S subwoofers. The Direct Out of each subwoofer is then connected to the inputs
of an additional pair of DRM18S subwoofers. The X-Over of these subwoofers may be set to DRM Top.
From here, the high-pass outputs of the two outer DRM18S subwoofers are connected directly to the inputs of a set
of DRM315 loudspeakers. The Speaker Modes of these PA loudspeakers may be set to Live (or Club) and the Subwoofer
HPF set to DRM Sub. Talk about beefy low end!
Outputs 1 and 2 from the mixer may be used as aux sends; these are connected directly to the CH1 inputs of a pair of DRM212
loudspeakers to be used as monitors for the band. The Speaker Modes of the monitor loudspeakers may be set to Monitor.