9.
Now we will install the new MIDI/Footswitch conversion cable. You will notice one side of the
MIDI/Footswitch conversion cable labeled motherboard and the other labeled daughter board.
You will also notice that there is a little blue or white (figure 11 below) dote indicating pin 1. It is
very important
that the MIDI/Footswitch conversion cable is installed in the correct orientation
in regards to pin 1 otherwise there could be damage to the motherboard. Take the side of the
MIDI/Footswitch conversion cable labeled motherboard and connect it to game port. Position the
cable so that the blue dote indicating pin 1 is facing the outer edge of the motherboard. Next we
will need to connect the other end of the MIDI/Footswitch conversion cable to the daughter board.
Position the cable so that the blue dote indicating pin 1 is facing inwards towards the
motherboard (figure 12 below).
Figure 11
Figure 12
Summary of Contents for DIGITAL XBUS - SOFTWARE
Page 25: ......
