background image

38

COLOPHON

(Roll credits please) Manual written by Jeff

Gilbert, based on a vignette by Ron Koliha,
with tidbits borrowed from almost everywhere.
Manual then defaced with proofreading pens in
the hands of Mackie’s legendary Tech Support
staff. Manual composed on a rinky-dink PC using
a low-budget word processor, then converted
to this amazing piece of work using a 13-story
1000 gigawhopper Macintosh operated by
Mackie’s notorious Advertising staff. Please, feel

Mackie, the "Running Man" figure, VLZ and XDR are trademarks or registered trademarks of Mackie Designs Inc. All other brand names
mentioned are trademarks or registered trademarks of their respective holders, and are hereby acknowledged.

©2003 Mackie Designs Inc.
All Rights Reserved.

free to let us know if you find an error or stumble
over a confusing paragraph. Thank you for reading
the entire manual (we know you have, or you
wouldn’t be here).

Mackie Designs is always striving to improve our

mixers by incorporating new and improved materi-
als, components and manufacturing methods.
Because we’re always trying to make things better,
we reserve the right to change these specifications
at any time, without notice.

Summary of Contents for 1604-VLS PRO









































Reviews: