background image

2

CAUTION    

AVIS

RISK OF ELECTRIC 

SHOCK 

DO NOT OPEN

RISQUE DE CHOC ELECTRIQUE

NE PAS OUVRIR

CAUTION: TO REDUCE THE RISK OF ELECTRIC SHOCK

DO NOT REMOVE COVER (OR BACK)

NO USER-SERVICEABLE PARTS INSIDE

REFER SERVICING TO QUALIFIED PERSONNEL

ATTENTION: POUR EVITER LES RISQUES DE CHOC

ELECTRIQUE, NE PAS ENLEVER LE COUVERCLE.  AUCUN

ENTRETIEN DE PIECES INTERIEURES PAR L'USAGER.  CONFIER

L'ENTRETIEN AU PERSONNEL QUALIFIE.

AVIS: POUR EVITER LES RISQUES D'INCENDIE OU

D'ELECTROCUTION, N'EXPOSEZ PAS CET ARTICLE 

A LA PLUIE OU A L'HUMIDITE

   The lightning flash with arrowhead symbol within an equilateral 
triangle is intended to alert the user to the presence of uninsulated
"dangerous voltage" within the product's enclosure, that may be 
of sufficient magnitude to constitute a risk of electric shock to persons.

   Le symbole éclair avec point de flèche à l'intérieur d'un triangle 
équilatéral est utilisé pour alerter l'utilisateur de la présence à 
l'intérieur du coffret de "voltage dangereux" non isolé d'ampleur 
suffisante pour constituer un risque d'éléctrocution.

   The exclamation point within an equilateral triangle is intended to 
alert the user of the presence of important operating and maintenance 
(servicing) instructions in the literature accompanying the appliance.

   Le point d'exclamation à l'intérieur d'un triangle équilatéral est 
employé pour alerter les utilisateurs de la présence d'instructions 
importantes pour le fonctionnement et l'entretien (service) dans le 
livret d'instruction accompagnant l'appareil.

Duration Per Day

Sound Level dBA,

Typical

  In Hours

  Slow Response

Example

8

90

Duo in small club

6

92

4

95

Subway Train

3

97

2

100

Very loud classical music

 1.5

102

1

105

Tami screaming at Adrian about deadlines

0.5

110

 0.25 or less

115

Loudest parts at a rock concert

WARNING

 — To reduce the risk of fire or electric shock,

do not expose this appliance to rain or moisture.

12.

 Damage Requiring Service — This Mackie product should be serviced

only by qualified service personnel when:

A.

 The power-supply cord or the plug has been damaged; or

B.

 Objects have fallen, or liquid has spilled into this Mackie

product; or

C.

 This Mackie product has been exposed to rain; or

D.

 This Mackie product does not appear to operate normally or

exhibits a marked change in performance; or

E.

 This Mackie product has been dropped, or its chassis damaged.

13.

 Servicing — The user should not attempt to service this Mackie product

beyond those means described in this operating manual. All other servicing
should be referred to the Mackie Service Department.

14.

 To prevent electric shock, do not use this polarized plug with an

extension cord, receptacle or other outlet unless the blades can be fully
inserted to prevent blade exposure.

Pour prévenir les chocs électriques ne pas utiliser cette fiche polariseé avec un
prolongateur, un prise de courant ou une autre sortie de courant, sauf si les
lames peuvent être insérées à fond sans laisser aucune pariie à découvert.

15.

 Grounding or Polarization — Precautions should be taken so that the

grounding or polarization means of this Mackie product is not defeated.

16.

 Power Precautions — Unplug this Mackie product during lightning storms

or when unused for long periods of time. Note that this Mackie product is not
completely disconnected from the AC mains service when the power switch is
in the OFF position.

17.

 This apparatus does not exceed the Class A/Class B (whichever is

applicable) limits for radio noise emissions from digital apparatus as set out in the
radio interference regulations of the Canadian Department of Communications.

ATTENTION —Le présent appareil numérique n’émet pas de bruits
radioélectriques dépassant las limites applicables aux appareils numériques de
class A/de class B (selon le cas) prescrites dans le règlement sur le brouillage
radioélectrique édicté par les ministere des communications du Canada.

18.

  Exposure to extremely high noise levels may cause permanent hearing

loss. Individuals vary considerably in susceptibility to noise-induced hearing loss,
but nearly everyone will lose some hearing if exposed to sufficiently intense
noise for a period of time. The U.S. Government’s Occupational Safety and
Health Administration (OSHA) has specified the permissible noise level exposures
shown in the following chart.

According to OSHA, any exposure in excess of these permissible limits could

result in some hearing loss. To ensure against potentially dangerous exposure to
high sound pressure levels, it is recommended that all persons exposed to equip-
ment capable of producing high sound pressure levels use hearing protectors
while the equipment is in operation. Ear plugs or protectors in the ear canals or
over the ears must be worn when operating the equipment in order to prevent
a permanent hearing loss if exposure is in excess of the limits set forth here.

SAFETY INSTRUCTIONS

1.

 Read Instructions — All the safety and operation instructions should be

read before this Mackie product is operated.

2.

 Retain Instructions — The safety and operating instructions should be kept

for future reference.

3.

 Heed Warnings — All warnings on this Mackie product and in these operating

instructions should be followed.

4.

 Follow Instructions — All operating and other instructions should be

followed.

5.

 Water and Moisture — This Mackie product should not be used near water

– for example, near a bathtub, washbowl, kitchen sink, laundry tub, in a wet
basement, near a swimming pool, swamp or salivating St. Bernard dog, etc.

6.

 Cleaning — Clean only with a dry cloth.

7.

  Ventilation — This Mackie product should be situated so that its

location or position does not interfere with its proper ventilation. For
example, the Component should not be situated on a bed, sofa, rug, or
similar surface that may block any ventilation openings, or placed in a
built-in installation such as a bookcase or cabinet that may impede the
flow of air through ventilation openings.

8.

 Heat — This Mackie product should be situated away from heat sources

such as radiators, or other devices which produce heat.

9.

 Power Sources — This Mackie product should be connected to a power

supply only of the type described in these operation instructions or as marked
on this Mackie product.

10.

 Power Cord Protection — Power supply cords should be routed so that

they are not likely to be walked upon or pinched by items placed upon or
against them, paying particular attention to cords at plugs, convenience
receptacles, and the point where they exit this Mackie product.

11.

 Object and Liquid Entry — Care should be taken so that objects do not

fall on, and liquids are not spilled into, this Mackie product.

Summary of Contents for 1604-VLS PRO









































Reviews: