Then search "Lube"
Your Variable Frequency Drive will need to be calibrated for your motor. This can be done directly from the operating
software. Under the Service tab, click the "Interface Config" button.
Now, search for your VFD. In the search bar (top bar outlined in red below), type in the model that came with your
cabinet. It is either a "Yaskawa V1000". That will bring up the editable parameters (shown in the lower red box
below). Simply highlight the value to change it. Many of these values may be able to remain the default ones.
You can find out what parameters need to be changed by looking at the info on your spindle motor name plate. Check
and change any of the values that need it (Number of poles, wattage, amperage, etc.) to make sure your spindle runs
at peak performance.
VFD Setup
