Mach ViroSub, User Manual, Page: 4 / 8

4
I N S T A L L A T I O N
The ViroSub should ideally be placed at a point along the same line as your
ViroPanels.
However, the ViroSub does not have to be placed between two panels.
Connec ti ng V i roPane ls/V iroSpheres t o the Vi roSub
For flexibility of placement, the ViroSub is supplied with 10 meters of cable with a
connector to the ViroSub in one end.
Connect the cable from:
• One panel speaker to the speaker out “Left” on the rear of the ViroSub.
• The second panel speaker to the speaker out “Right” on the rear of the ViroSub.
Connec ti ng t he V i roSub to a n audio source
S I N G L E S O U R C E
To use a single source such as DVD, CD, Tape, Tuner or MP3 player, connect
phono signal cable (not included) from the source component to the audio inputs on
the rear of the ViroSub. Connect the:
• Left output of the source component to the left audio input of the ViroSub.
• Right output of the source component to the right audio input of the system.
If the source component has its own volume control, turn the volume control on the
front of the ViroSub all the way up permanently and use the source component's
volume control to select listening level. If the source component does not have its
own volume control, use the volume control on the front of the ViroSub to select
listening level.
P R E A M P , I N T E G R A T E D A M P O R R E C E I V E R W I T H P R E A M P
O U T P U T S
Connect phono signal cable (not included) from the preamp outputs on the
preamp/amp/receiver to the audio inputs on the rear of the ViroSub.
Connect the:
• Left output to the left audio input of the ViroSub.
• Right output to the right audio input of the ViroSub.
Turn the volume control on the front of the ViroSub all the way up permanently and
use the preamp/amp/receiver volume control to select listening level.
www.audiovias.com