Mach MS 900E, Instructions Manual

Page: 14 / 22

14
•
When the water intake cycle is complete, open the door (I) and add detergent (about 2
g. per litre of tank capacity). Position the full basket (L) and close the door (I). Select the
appropriate washing cycle by pressing button (3) (short cycle I button pressed, long
cycle II button not pressed. Now press the START button (4) and the wash cycle
displayed by light (D) will start. When the cycle is over, this light goes out. To turn off
the appliance, turn the switch (1) to 0. Light (A) indicates the appliance is off (Fig. 3-1 ÷
3-3). Add detergent every 5 - 6 wash cycles.
N.B. : It is recommended ta start the wash cycle when both litgh of the heating elements,
boiler (C) and tank (B) are off, as indicated at point 3.1 Start up.
Fig. 3-3
•
The detergent dispenser (M) rinse aid dispenser (N) are regulated by the
manufacturer. If the setting needs to be changed, turn the regulating screw on the
dispensers. The detergent and rinse aid containers (if not provided with the appliance)
should be placed next to the machine and connected to the transparent pipes fitted to
the back of the appliance (Tank for the detergent and Boiler for the rinse aid).
Fig. 3-4
3.1.1 WASHING PROGRAMMES
3.1.2 DETERGENT AND RINSE AID