Mach CN7 User Manual Download Page 20

SPECIFICATIONS
Power rating IEC268: 300 watt
Power rating peak: 1200 watt
Sensitivity 1w/1m: 95 dB
Max SPL, calculated long term: 120 dB
Max SPL, peak: 126 dB
Frequency re/-3dB: 65 Hz - 20 kHz
Dispersion Angle: H 90deg x V 60deg
Nominal impedance: 4 ohm
Recommended amplifier: 400 watt into 4 ohm

WEIGHT & MEASUREMENTS:
Dimensions (HxWxD): 62 x 34.9 x 33.8cm
(24.4 x 13.7 x 13.3 inches)
Net weight: 22kg (48,5 lb)
Finish: Black or white SafeCoat coating
with other colors optional
Grille: 2 mm steel with foam backing
Input connectors: 2 x Speakon® NL 4
and barrier strip terminals
Rigging hardware: Included U-bracket.

• Unique, full range near-fi eld speaker combining hi-fi 
properties with medium SPL’s in a compact design
• A 2-way speaker designed as a compact standalone
cabinet with a highly controlled dispersion pattern
• Two 8” woofers with an extended frequency
response and 1” compression driver with a constant
coverage horn
• Designed specifically for applications in which clarity 
and speech intelligibility are needed.
• Ideal for small to medium sized venues (bars,
cafés, etc.) or as in-fi ll in seating areas. Can be used
as a standalone solution or in combination with a
subwoofer.

C

N

8

A unique, full range near-field speaker combining hi-fi properties with medium SPL’s in a compact design. Featuring 
18 flying points - four of which are fully adjustable - and a customized U-bracket included as standard with every 
speaker,  the  C-Range  is  an  extremely  versatile  installation  speaker  series.  The  distinct  new  CN8  in  the  C-Range 
speaker series from MACH powerfully projects every nuance of pure sound in any environment you choose.

18

19

Summary of Contents for CN7



























Reviews: