Mach Power WL-CPE5G24-064, User Manual

Page: 6 / 30

CHAPTER 1
HARDWARE AND OPERATION MODE INSTRUCTION
1.1 LED indicators
Green: Power Indicator
Blue: Wi-Fi Indicator
1.2 CPE interface
RST: Reset Button, it make AP revert to default data after press it 15
seconds.
WAN: Gigabit WAN Port, connect with ADSL modem or Internet mainly. It
will be LAN port under Outdoor CPE and WiFi Repeater operation mode
LAN: Fast LAN Port to end users
LED: LED Indicator of WAN port and LAN port
DC: DC power connector
S/M: In WDS working mode, If master CPE, then the button should be in
M side; If Slave CPE, then the button should be in S side. PS. Reset it to
do the WDS Connection.
1.3 Power Supply
1.3.1 Powered by PoE Switch
The connection diagram shows as image1 , Internet cable from PoE
Switch to Outdoor CPE’s WAN Port, then PC access into Outdoor CPE
wired/wireless.
Please note: the outdoor CPE support IEEE 802.3at PoE, the switch
6