Mach Power WL-CPE5G24-064, User Manual, Page: 5 / 30

General warnings
• Fasten the CPE in the desired position, considering that as the device
being installed is a radio device, the following simple rules must be
observed:
• Avoid enclosing the appliance between two metal walls;
• The efficiency of radio transmission is reduced when there are obsta-
cles, metal shelving or other objects that may block the reception of the
radio signals;
• If the product is wall-mounted, fasten it to a masonry wall rather than a
metal wall, to improve the range of the signal;
• Remember that the best position for the CPE is one where it is “visible”
to the other devices. It should be positioned in such a way as to minimize
any obstacles;
• Like all radio equipment, avoid installing the CPE near other electronic
appliances so as to avoid interference;
• If the appliance is used in a way that is not described by the manufactu-
rer, the specified level of protection may be affected.
• Do not install the instruments in environments with the following
characteristics:
- strong vibrations or knocks;
- If the appliance is used in a manner not specified by the manufacturer,
the protections provided by the appliance may be compromised;
5