9
ALL AP:
Mean now show all the online AP, offline AP. Can select online AP or offline AP.
Refresh Interval:
mean how long this AC controller will refresh the AP QTY.
Search by IP:
mean search the wireless AP by IP address, make hook in the white box, input IP address, then search.
Search by MAC:
mean search the wireless AP by MAC address, make hook in the white box, input MAC address, then search
Batch Set:
mean can configure the wireless AP’s data in batch.
Refresh:
Scan the AP list again.
Delete:
Select some AP, then delete from this AC controller.
Reboot:
Select some AP, then restart this AP
Reset:
Select some AP, revert to factory default.
Upgrade:
can upgrade firmware for wireless AP.
4.2
Device Group
Click Device Group at first, then will show New/Delete, Click New, then configure the data in Wireless Basic and Wireless Advanced
part; Please note, this data will be applicated for all the AP in this group. After finish all, set an group name, then Apply to finish.
For detail procedure, please refer to following picture:
Add /Remove AP into group:
Please following the step showed in following picture:
