7
SN:
Show how many AP access into this AC controller
Location:
show where the AP setup
Name:
what’s the name of this AP.
Device IP:
AP’s IP address, click this IP address, can access into AP’s GUI when you set an static IP address for your PC in same IP
segament. If many AP in the device list and you want to find out one AP, you can input this AP’s IP address for quickly search.
Device MAC:
AP’s MAC address, if you want to find out one AP quickly by MAC address, just input the MAC address in top of this GUI,
then search.
Users:
How many end users access into this AP
Version:
The firmware version of this AP
Channel:
the channel of this wireless AP
Online Time:
How long this wireless AP online and access into this AC controller.
Group:
you can set some AP in one group, then this part will show group name mainly.
Config:
click icon under config will show following picture: From this picture, will show each AP’s status, Basic info,and advanced
setting. If any data you want to make, then Apply to finish.
Device Status:
show AP’s Model number, online time, MAC address, IP address, firmware info, channel, RF Power showed in above
picture.
Device Network:
Show the Wireless AP’s WAN network info and IP address
