7
ENG
mode.
6.
Press the button to activate the fan. the fan is activated in first speed; Press the
button again to activate the second speed; Press again to go to third speed; press
the button for the fourth time to stop the fan and enter standby mode, a blue
indicator will light up in working mode.
7.
Press the accelerator switch to activate rotation, press the button again to stop
it.
Water tank filling operation steps
Please inject clean tap water witing 0~40°C
1
Place the device on the floor
2
Fill the tank with 4.2L of water (up to the indicated edge) add the salt
(max 6g - we recommend using the specific pre-dosed Mach Power salt)
3
Lift up the fog cover of the water tank
4
Pour the water into the tank
Be sure to turn off the switch when adding water, and pull of the power plug
Machinery operation
1.
Place the device on the floor;
